✨ New Arrivals Just Dropped!Explore
HomeStore

3DIGI FLYBARLESS SYSTEM DNRS

Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10

3DIGI FLYBARLESS SYSTEM DNRS

3DIGI FLYBARLESS SYSTEM DNRS

FREE SHIPPING on this item

    The revolutionary electronic stabilization system for flybarless (FBL) RC helicopters

    3DIGI is ready to use and supports a wide range of interfaces. Connection for setup and tuning can be direct to a computer via a Micro-USB cable (user-supplied) or an Android device (using an optional external module) via Bluetooth.

    FEATURES

    •  Advanced 6 Axis MEMS sensor (Gyro and Acceleration)
    • Powerful 32bit ARM Microcontrollers.
    • Integrated R2 micropower bus supplies the internal processor,  sensors, and  Spektrum satellites from a minimum input voltage of 1.7 volts. 
    • Optional HC (High Current) version with dedicated power input.
    • Built-in vibration analysis (data recording via optional micro SD card).
    • Onboard Micro USB port for configuration and automatic firmware updates.
    • Simple and friendly Windows-based setup Terminal.
    • Android App.
    • Connection for standard Bluetooth modules. 
    • Connector for standard GPS receiver (compatibility list in preparation).RC input supports all popular sum signal inputs (PPM, S-Bus, UDI, Graupner SUMD, Multiplex SRXL, Jeti EX Bus)  or Spectrum satellites.
    • Servo outputs for swashplate (4X), Tail, and Throttle.
    • Input for RPM sensor.
    • Status display via 2 LEDs.
    • 3 Parameter Sets (Banks) selectable in flight
    • Live tuning of up to 8 individual parameters in flight allows for fast tuning.
    • Internal event Logging
    • Micro SD slot (Micro SD card is not included) for storage of flight, vibration, and GPS data (with optional external GPS module)
    • Auto trim for precise trimming of the swashplate and tail.

    TECHNICAL SPECIFICATIONS

    • Dimensions approx.: 39.5mm x 32,8mm x 14.6mm
    • Weight approx .: 15g - 0.52 Ounce
    • Operating voltage: 1.7V - 9V (the minimum voltage of the servos used must be observed for trouble-free operation)
    • Sensor: MEMS
    • Processor: ARM 32 bit


    Lukas Dinger having fun with the XNOVA 4530-480KV & 3DIGI

     

    WHAT'S IN THE BOX

    1 x 3Digi (Flybarless System)
    2 x Double-sided adhesive pads

    Instructions Manual (12/19/2015) 

     

    NEW Installer for Terminal V2.0.0 (07.07.2017)
    • New settings for the current firmware
    • Several improvements and optimizations
    • 3Digi Firmware greater than V2.0.0 required

     NEW  Firmware V2.0.0 (
    • Hint: Save the current setup as a file with the old Terminal before the update
    • AutoLevel/Rescue
    • Improved control feeling filter: smoother cyclic stops combined with better responding control
    • Initial response optimizer: helps you to find a good setting for the initial response
    • Speed flight optimizer: Makes the helicopter smoother in speed flight passages
    • Improved swash special mixer: allows mixing yaw to swash servos, for tandem, coax and so on
    • Several internal improvements and optimizations
    • Terminal V2.0.X required
    • Android App 2.0.X required
    • User guide V2.0.0
    • Jeti Integration files V2.0.0


    Additional documentation is downloadable at www.3digi.de

     

     

    Select Select a version
    From $44.70

    Original: $149.00

    -70%
    3DIGI FLYBARLESS SYSTEM DNRS—

    $149.00

    $44.70

    Product Information

    Shipping & Returns

    Description

    3DIGI FLYBARLESS SYSTEM DNRS

    FREE SHIPPING on this item

      The revolutionary electronic stabilization system for flybarless (FBL) RC helicopters

      3DIGI is ready to use and supports a wide range of interfaces. Connection for setup and tuning can be direct to a computer via a Micro-USB cable (user-supplied) or an Android device (using an optional external module) via Bluetooth.

      FEATURES

      •  Advanced 6 Axis MEMS sensor (Gyro and Acceleration)
      • Powerful 32bit ARM Microcontrollers.
      • Integrated R2 micropower bus supplies the internal processor,  sensors, and  Spektrum satellites from a minimum input voltage of 1.7 volts. 
      • Optional HC (High Current) version with dedicated power input.
      • Built-in vibration analysis (data recording via optional micro SD card).
      • Onboard Micro USB port for configuration and automatic firmware updates.
      • Simple and friendly Windows-based setup Terminal.
      • Android App.
      • Connection for standard Bluetooth modules. 
      • Connector for standard GPS receiver (compatibility list in preparation).RC input supports all popular sum signal inputs (PPM, S-Bus, UDI, Graupner SUMD, Multiplex SRXL, Jeti EX Bus)  or Spectrum satellites.
      • Servo outputs for swashplate (4X), Tail, and Throttle.
      • Input for RPM sensor.
      • Status display via 2 LEDs.
      • 3 Parameter Sets (Banks) selectable in flight
      • Live tuning of up to 8 individual parameters in flight allows for fast tuning.
      • Internal event Logging
      • Micro SD slot (Micro SD card is not included) for storage of flight, vibration, and GPS data (with optional external GPS module)
      • Auto trim for precise trimming of the swashplate and tail.

      TECHNICAL SPECIFICATIONS

      • Dimensions approx.: 39.5mm x 32,8mm x 14.6mm
      • Weight approx .: 15g - 0.52 Ounce
      • Operating voltage: 1.7V - 9V (the minimum voltage of the servos used must be observed for trouble-free operation)
      • Sensor: MEMS
      • Processor: ARM 32 bit


      Lukas Dinger having fun with the XNOVA 4530-480KV & 3DIGI

       

      WHAT'S IN THE BOX

      1 x 3Digi (Flybarless System)
      2 x Double-sided adhesive pads

      Instructions Manual (12/19/2015) 

       

      NEW Installer for Terminal V2.0.0 (07.07.2017)
      • New settings for the current firmware
      • Several improvements and optimizations
      • 3Digi Firmware greater than V2.0.0 required

       NEW  Firmware V2.0.0 (
      • Hint: Save the current setup as a file with the old Terminal before the update
      • AutoLevel/Rescue
      • Improved control feeling filter: smoother cyclic stops combined with better responding control
      • Initial response optimizer: helps you to find a good setting for the initial response
      • Speed flight optimizer: Makes the helicopter smoother in speed flight passages
      • Improved swash special mixer: allows mixing yaw to swash servos, for tandem, coax and so on
      • Several internal improvements and optimizations
      • Terminal V2.0.X required
      • Android App 2.0.X required
      • User guide V2.0.0
      • Jeti Integration files V2.0.0


      Additional documentation is downloadable at www.3digi.de